Panasonic EASA-PHONE KX-T123210 Installation Manual page 165

Description
This feature gives each message of the SMDR
an account code of the called or calling party.
[
Station Message Detail Recording (SMDR) is
cost saving feature that records all incoming
and outgoing calls through the CO line.
I
This feature has two modes "Forced" and
"Option".
In the "Forced" mode, the account code must
be entered every time the extension user dials.
In the "Option" mode, the account code may be
entered when a record of the account code is
needed.
When setting to the "Forced" mode, see page
3-70.
The programmable feature (F3 only) button of
the KX-T123250, KX-T61650 or KX-T30850 can
also be used for "Account Code" if programming
is done beforehand in the extension.
For programming, see page 4-60.
O~erati&
Forced mode
n Making a Call
1.
Lift the handset or press the SP-PHONE
2.
3.
4.
5.
0
\.
button.
Press the CO button.
The FWDI DND Indicator will flash.
Press the FWDI DN D (or F3) button.
"Enter ACCNT Code" will be displayed.
The FWD/DND Indicator will light.
Intermittent tone is heard.
Dial the account code.
Account code must be 4 digits.
CO dial tone will be heard.
Dial the phone number.
You may dial 9 or 81 through 88 instead of
pressing the CO button.
n Receiving a call
If you want to record a calling party's account
code in the SMDR, follow the below-mentioned
procedure.
Within 30 seconds of finishing your conversation
or while having a conversation,
The FWD/DND Indicator will flash.
1.
Press the FWD/ DND (or F3) button.
"Enter ACCNT Code" will be displayed.
The FWD/DND Indicator will light.
2. Dial the account code.
Account code must be 4 digits.
l
Dialing the account code must be done
before hanging up.
Option Mode
n Making or Receiving a Call
If you want to record a calling or called party's
account code in the SMDR, follow the below-
mentioned procedure.
Within 30 seconds of finishing your conversation
or while having a conversation,
1.
Press the FWD/ DND (or F3) button.
"Enter ACCNT Code" will be displayed.
The FWD/DND Indicator will light.
2. Dial the account code.
Account code must be 4 digits.
l
Dialing the account code must be done
before hanging up.
Conditions
Account code must be 4 numerical digits
except for the I'#" and "Jo" button.
If you enter the wrong account code, press
the FWD/ DND button and enter the correct
code.
If account codes are programmed with
telephone numbers for one touch dialing or
system speed dialing, you need not to dial
an account code when making a call.
Program as follows.
4-40