Panasonic EASA-PHONE KX-T123210 Installation Manual page 117

Doorphone Feature
,.....................................
until the desired doorphone number (1 or 2) appears
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . until the desired jack number appears
m : on jack number 01
m[ : on jack number 32
m : to assign the same on all 32 jacks
. :i, until the desired
mode appears
. . . . . . . . ..default
(all 32 jack numbers)
Description
Allows each extension to be programmed for
receiving calls from up to 2 doorphones during
the day mode.
(Doorphone is an option.)
Programming
Dial (70).
1.
,2.
3.
4.
5.
" Day Door Phone" will be displayed.
Press the NEXT button.
" Door NO ? +" will be displayed.
Press the NEXT button or dial the doorphone
number (1 or 2).
" DP-1:~Enable" will be displayed.
jack number
Repeat pressing the m button until the
desired jack number appears, or press the
I#I button and then dial the jack number.
Press the SELECT button to alternate between
" Enable" and " Disable" to select the desired
mode.
3-75
6. Press the MEMORY button.
The LCD will stop blinking.
7. l To advance to the next jack number,
press the m button.
l To return to the previous jack number,
press the w button.
l To go to the desired jack number,
press the
q
button and then dial the
jack number.
8. Repeat steps 5 to 7, to program the assignment
of the other jack numbers.
9. Repeat steps 3 to 8, to program the assignment
of the another doorphone.
10. To return to the initial program mode, press the
END button.
Programming Table
See page 7-24.