1.
Turn the Power Switch to ON.
2. Set the System Program Switch to " PITS" position.
The LCD on the KX-T123230
will show " SYS-PGM
NO ?-I' .
o Be sure the handset of the extension
connected
to jack number
01 is in the cradle and the speakerphone
button off.
3. To program
automatic
line access number 9 and the phone
number 987-654-3210
into speed access code 00. (Refer to
page 3-5.)
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
KX-Tl23230
at extension connected to jack number 01.
(Extension connected to jack number 01 must be a
KX-T123230.1
Dial (01) or press the
Auto button.
Press the NEXT button.
Dial (00) or press the
NEXT button.
0 Dial " 9" .
@ Press " - " button.
0 Dial " 987" .
@ Press " - " button.
($ Dial " 654" .
@ Press " - " button.
0 Dial " 3210" .
Press the MEMORY
button.
Display
l
If nothing is stored in
access code " OO" ,
00: Not Stored
l
If already stored the
automatic
line access
number 9 and the phone
number 123-456-7890,
l
To program the next access code, press the NEXT
button.
l
To program
a desired
access code, press the SELECT
button and dial speed access code.
4. Return the System Program Switch to " SET" position.
0 To make program change,
start from the beginning.
3-3
While programming
if a mistake is made,
1. Press the " END" button.
2. Start programming
procedure
from the
beginning.
l
You will hear a beep after pressing
the
MEMORY
button.
l
The MEMORY
indicator
light will go on
when the MEMORY
button is pressed,
and then the Indicator
light will go out
when the NEXT or PREV button is pressed.