Panasonic EASA-PHONE KX-T123210 Installation Manual page 179

To Change into DSS Button
Setting
l Be sure the handset is in the cradle and the
SP-PHONE button is off.
l Set the MEMORY switch of the proprietary
telephone to "PROGRAM".
which you
extension MEMORY
want to number
change into (100 throughl99)
DSS button
l After programming all CO buttons, return
the MEMORY switch to the "SET" position.
I
Dialing (Inter Office Calling)
0
kl
Lift handset
or press
SP-PHONE
Press CO
which has
been changed
into
DSS
Description
Allows each CO button to change into the DSS
(Direct Station Selection) button.
DSS button can be used instead of dialing a
extension number.
Operation
Setting
0
0
1.
2.
3.
4.
0
Be sure the handset is in the cradle and the
SP-PHONE button is off.
Set the MEMORY switch of the proprietary
telephone to
"PROGRAM".
Press the CO button which you want to change
into DSS button.
When pressing CO 1 button,
"CO-01" will be displayed.
Dial (1).
"EXT- " will be displayed.
Dial the extension number (100 through 199).
When dialing (120),
"EXT-120" will be displayed.
Press the MEMORY button.
After programming all CO buttons, return the
MEMORY switch to the "SET" position.
dialing (Inter Office Calling)
1. Lift the handset or press the SP-PHONE button.
2. Press the CO button which has been changed into
DSS.
4-54
To Change into One Touch Dialing Button
l Be sure the handset is in the cradle and the
SP-PHONE button is off.
l Set the MEMORY switch of the proprietary
telephone to "PROGRAM".
lFhj pq pq pJ
Press CO
which you want toDial "2"
Dial "9" Dial
change into
phone
number
one touch
dialing
AUTO
0
0
You may dial 81 through
[I
88 instead of 9.
MEMORY
Press
MEMORY
l After programming all CO buttons, return
the MEMORY switch to the
"SET"
position.
Description
Allows each CO button to change into the one
touch dialing button.
Up to 16 digits can be stored into each of the 12
CO buttons.
Operation
0
0
1.
2.
3.
0
Be sure the handset is in the cradle and the
SP-PHONE button is off.
Set the MEMORY switch of the proprietary
telephone to
"PROGRAM".
Press the CO button which you want to
change into one touch dialing
When pressing CO 1 button, "CO-01" will
be displayed.
Dial (2).
Dial (9).
You may dial 81 through 88 instead of 9.
9... Each extension can automatically select
an idle CO line.
81 through 88... Each extension can select
a trunk group designated.
4. Dial the phone number.
5. Press the MEMORY button.
l After programming all CO buttons, return the
MEMORY switch to the
"SET"
position.
l For dialing, refer to "One Touch Dialing" on
page
4-4.
:_ :
':
,".