Panasonic EASA-PHONE KX-T123210 Installation Manual page 173

Station Programming
To Program
l
Be sure the handset is in the cradle and the SP-PHONE button is off.
l
Set the MEMORY switch of the proprietary telephone to "PROGRAM".
Example:
Paging All Extensions (Dial 330).
Press
Dial "330"
Press
PROGRAMMABLE
MEMORY
FEATURE
After programming all the system features, return the MEMORY switch to the
"SET"
position,
To Access
Lift handset Press
Confirmation
or press PROGRAMMABLE tone of 1 beep
SP-PHONE FEATURE will be heard
Page
Description
To Access
Features that can be accessed by using the
dialing button also can be programmed into
memory.
(e.g. Paging All Extensions.)
1.
Lift the handset or press the
"SP-PHONE" button.
2. Press the PROGRAMMABLE FEATURE
button and wait for confirmation tone
(one beep).
3. Start paging.
Operation
To Program
Set the MEMORY switch of the proprietary
telephone to
"PROGRAM".
"PITS-PGM NO ?--" will be displayed.
Example:
Paging All Extensions (Dial 330).
1. Press the PROGRAMMABLE FEATURE
button.
2. Dial (330).
0
3. PressMEMORY button.
System feature described in the table on
page 6-5 can be programmed into
memory.
After programming all the numbers, return
the MEMORY switch to the "SET" position.
4-48