2.2 Standard Operations
2.2.3
Attaching and Removing the Front Cover
This section explains how to attach and remove the front cover.
Perform the following procedure to remove the front cover:
Attaching the front cover
Attach the front cover in the following order.
1
2
40
Do
CAUTION
After completing the operation, be sure to reattach the front cover.
Note:
This section explains how to attach and remove the front cover for the controller enclosure.
Perform the same procedure to attach and remove the front cover for the drive enclosure.
Insert the front cover key and turn it 90° counterclockwise.
Front cover key
Fit the front cover on the left end slot of the controller enclosure to attach.
Slot
ETERNUS2000 disk storage system User Guide
Copyright 2009 FUJITSU LIMITED
P3AM-2512-03EN