Fujitsu Eternus2000 Manual page 105

3
Connect the power cords (AC input cables) (4m) supplied with the AC outlet box
to the inlet of the AC outlet box.
AC outlet box
4
Use the power cord clamps to prevent the power plugs from coming unplugged.
Attach the power clamps removed in
5
Connect the plug at the other end of each of the power cords (AC input cables)
(4m) connected in
P3AM-2512-03EN ETERNUS2000 disk storage system User Guide
Inlet
Inlet
INPUT #1
INPUT #0
1
2
3
Step 3 to the outlet.
Do Not
WARNING
• Do not connect power cords or other cables during thunder-
storms, as lightning can result in fire or electric shock.
Do
CAUTION
• Be sure to fully insert each plug into its socket. Failure to do
so may lead to fire or electrical shock.
Do Not
• When disconnecting the power plug, be sure to pull from the
plug and not the cord. Pulling the cord may expose or snap
the inner wires, which can lead to fire or electrical shock.
• Do not use the server service outlet to connect the device
power cord.
• Do not overload an electrical outlet. Doing so may lead to
electric shock or fire.
Copyright 2009 FUJITSU LIMITED
Step 1.
Chapter 4 Setup
4
81