Fujitsu Eternus2000 Manual page 121

CAUTION
For details on the settings, refer to "ETERNUS2000 ETERNUSmgr User Guide -Settings/Maintenance-".
Refer
Procedure
1
Click the [Setting4] button in the [Tutorial] wizard.
Setting4: starting [RAID Group creation] screen appears.
2
Click the [Execute] button.
A screen to create the RAID groups appears.
3
Click the
P3AM-2512-03EN ETERNUS2000 disk storage system User Guide
Do
• Data may not be recovered if a disk drive fails because RAID0 configu-
ration is not redundant. RAID1, RAID1+0, RAID5, and RAID6 are rec-
ommended as the RAID level.
Do Not
• Do not move disks that the RAID group or volume is set for, or that are
registered as HotSpare disks, to another slot.
"ETERNUS2000 ETERNUSmgr User Guide -Settings/Maintenance-"
(Register) button to enable the RAID group information setting.
Copyright 2009 FUJITSU LIMITED
Chapter 4 Setup
4
97