Panasonic MEW01349 Operating Instructions Manual page 101

Panasonic Electric Works Nordic AB
MEW01349
"↵ "
"↵ "
"Disable" or "Re-
enable".
Rev: -
Select output type control
extinguishing
Select control unit 00
[Blank space]
Escape
menu Disable Re-enable
Select control unit 00
[Blank space]
Escape
menu Disable Re-enable
NOTE!
When the output type
three types will be disabled, all at the same time. This can be done for
one or more Selected control units or All control units.
To indicate such a disablement, the output trigger conditions "Control
Disabled Control Unit (xx)" and "General Control Disabled"
respectively, can be used.
48
NOTE! Outputs disabled for a specific control unit (e.g. CU 03) can not
be collectively re-enabled via all CUs. You have to re-enable the outputs for
the specific control unit(s), e.g. CU 03.
Operating Instructions Fire alarm system EBL512 G3, V1.1.x
ventilation
contr/exting/vent
interlocking
All
All
contr/exting/vent
99
Use "▼" or "▲" to select
the output type in the list
and press "↵ ".
See NOTE! below.
Write the CU number or
press "►" and select "All"
48
(all CUs) .
Press "Disable" or "Re-
enable".
Disable or Re-enable
another output type /
control unit (the procedure
is similar for all types) or
press "ESC". Scroll to
another menu or press
"ESC".
is selected, outputs of these