Accessing A Pedestal-Mounted Server; Removing The Side Cover On A Pedestal-Mounted Server; Removing The Top Cover On Pedestal-Mounted Server - HP rp3440 Service Manual

Accessing a Pedestal-Mounted Server

NOTE: If you are replacing a hot-swappable item, you can leave the server on and leave the
external cables (including the power cord) connected.

Removing the Side Cover on a Pedestal-Mounted Server

To remove the side cover, follow these steps:
1. Power off the server and disconnect the power and external cables.
2. Remove the side cover.
a. Grasp both indentations at the top of the side panel and pull outward.
b. Lift the side cover off of the server chassis.
Figure 3-1 1 Removing the Side Cover on a Pedestal-Mounted Server

Removing the Top Cover on Pedestal-Mounted Server

To remove the top cover, follow these steps:
1. Turn the top cover lock keyswitch to the unlocked position.
2. Rotate the blue release handle to release the latch.
3. Slide the cover toward the back of the chassis and lift the cover off.
Installing Additional Components 57