Ide Interface; Gb System Lan; Usb Connectors; Disk And I/O Path Logging - HP rp3440 Service Manual

IDE Interface

The IDE controller (PCI649) supports the ATAPI zero (0) to five (5) modes (from 16 to 100 MB/s).
The usable speed on this system is limited to 16 MHz (ATA-33 mode, 33 MB/s) because the
slimline CD/DVD devices do not support the ATA-66 and 100 modes.
The primary IDE channel is the only channel that is implemented. The IDE cable provides only
one drive connector, of the master type, for the optical storage peripheral.

1 GB System LAN

The 1 GB System LAN port provides:
• Main system LAN
• 10/100/1000 MB capable

USB Connectors

The USB connectors provide:
• High speed 480 MB/seconds capable
• Full speed 12 MB/seconds and low speed 1.5 MB/seconds
• Support for USB keyboard and mouse
• HP-UX supports HP USB keyboard and mouse

Disk and I/O Path Logging

Some failures result in I/O path logging. These paths help to indicate the source of the error and
can be included in the error message or logged into console or event logs.
Table 1-3 describes the disk drive and DVD paths for the server.
Table 1-3 Internal Disk and DVD Paths
Slot
Disk slot 0
Disk slot 1
Disk slot 2
DVD slot
Table 1-4 describes the extended core I/O paths for the server.
Table 1-4 Extended Core I/O Paths
Slot
Core I/O
Core I/O
Core I/O
Core I/O
Core I/O
Core I/O
Function Associated with Path
Ultra 3 SCSI I/O for bottom removable disk
Ultra 3 SCSI I/O for middle removable disk
Ultra 3 SCSI I/O for top removable disk
IDE I/O for DVD
Function Associated with Path
USB port
USB port
USB port
USB port
USB port
IDE controller
Location ACPI Path
Bottom disk slot 0/1/1/0.0.0
Middle disk slot 0/1/1/0.1.0
Top disk slot 0/1/1/1.2.0
DVD slot 0/0/2/0.0.0
Location ACPI Path
Rear panel (with 0/0/1/0
mouse symbol)
0/0/1/0 Rear panel (top/ white
connector)
Rear panel (with 0/0/1/1
keyboard symbol)
Rear panel 0/0/1/1
(bottom/white
connector)
Internal 0/0/1/2
System board 0/0/2/0
Detailed Server Description 29