Powering On The Server; Powering On The Server Using The Ilo Mp Pc Command; Powering On The Server Manually; Powering Off The Server - HP rp3440 Service Manual

Table 3-8 Power States

Power States

Standby power
Full power
Off
NOTE: If the power restore feature is set to Always On through the iLO MP PR command, the
server automatically powers on to the full power state when the power cord is plugged in to the
server.

Powering On the Server

If the server is in the standby power state, power on the server to full power using the following
methods:
• iLO MP PC command
• Power button

Powering On the Server Using the iLO MP PC Command

NOTE: If the power restore feature is set to Always On through the iLO MP PR command, the
server automatically powers on to the full power state when the power cord is plugged in to the
server.
To power on the server using the iLO MP PC command, follow these steps:
1. Plug all the power cables into the receptacles on the rear panel of the server.
2. Initiate a console session, and access the MP Main Menu.
3. Enter CM to enable command mode.
4. Enter PC to use the remote power control command.
5. Enter ON to power on the server, and enter YES when prompted to confirm the action.
6. Start the operating system.

Powering On the Server Manually

NOTE:
If the power restore feature is set to Always On through the iLO MP PR command, the
server automatically powers on to the full power state when the power cord is plugged in to the
server.
To manually power on the server, follow these steps:
1. Plug all the power cables into the receptacles on the rear panel of the server.
2. To start the server, press the Power button.
3. Start the operating system.

Powering Off the Server

If the server is in the standby or full power state, power off the server using the following methods:
• iLO MP PC command
• Power button
Power Cable Power Activated Through the iLO MP PC
Plugged Into Command; or Front Panel Power Button
Receptacle? Activated?
Yes No
Yes Yes
No No
Standby DC DC Voltage
Voltage Applied?
Applied?
Yes No
Yes Yes
No No
Powering the Server ON and OFF 101