Cisco SPA112 Administration Manual page 96

Configuring Voice
Configuring Voice Settings
Cisco SPA100 Series Phone Adapters Administration Guide
*1xxxxxxxxxx<:@fwd.pulver.com;nat;uid=jsmith;pwd=xyz
The syntax for a dial plan expression is described in the table below.
Dial Plan Entry
*xx
[3469]11
0
00
[2-9]xxxxxx
1xxx[2-9]xxxxxx
xxxxxxxxxxxx.
NAT Settings
Field
NAT Mapping Enable
NAT Keep Alive Enable
NAT Keep Alive Msg
NAT Keep Alive Dest
EXT SIP Port
Functionality
Allow arbitrary 2 digit star code
Allow x11 sequences
Operator
Int'l Operator
US local number
US 1 + 10-digit long distance number
Everything else
Description
To use externally mapped IP addresses and SIP/
RTP ports in SIP messages, select yes.
Otherwise, select no. Default setting: no.
To send the configured NAT keep alive message
periodically, select yes. Otherwise, select no.
Default setting: no.
Enter the keep alive message that should be sent
periodically to maintain the current NAT mapping.
If the value is $NOTIFY, a NOTIFY message is
sent. If the value is $REGISTER, a REGISTER
message without contact is sent. Default setting:
$NOTIFY.
Destination that should receive NAT keep alive
messages. If the value is $PROXY, the messages
are sent to the current proxy server or outbound
proxy server. Default setting: $PROXY.
The external SIP port number.
4
96