Cisco SPA112 Administration Manual page 77

Configuring Voice
Configuring Voice Settings
Cisco SPA100 Series Phone Adapters Administration Guide
Field
SIT4 Tone
MWI Dial Tone
Cfwd Dial Tone
Holding Tone
Conference Tone
Secure Call
Indication Tone
Feature Invocation
Tone
Distinctive Ring Patterns
Field
Ring1 Cadence
Ring2 Cadence
Ring3 Cadence
Ring4 Cadence
Description
Alternative to the Reorder Tone played when an error
occurs as a caller makes an outbound call. The RSC to
trigger this tone is configurable on the SIP screen.
Default setting: 985@-4,1371@-4,1777@-4;20(.380/0/
1,.274/0/2,.380/0/3,0/4/0)
Played instead of the Dial Tone when there are unheard
messages in the caller's mailbox. Default setting: 350@-
5,440@-5;2(. 1 /. 1 /1+2);10(*/0/1+2)
Played when all calls are forwarded. Defaultsetting:
350@-5,440@-5;2(.2/.2/1+2);10(*/0/1+2)
Informs the local caller that the far end has placed the
call on hold. Default setting: 600@-5;*(. 1 /. 1 /1,. 1 /. 1 /1,. 1 /9.5/
1)
Played to all parties when a three-way conference call is
in progress. Default setting: 350@-5;20(. 1 /. 1 /1,. 1 /9.7/1)
Played when a call has been successfully switched to
secure mode. It should be played only for a short while
(less than 30 seconds) and at a reduced level (less than
-19 dBm) so it does not interfere with the conversation.
Default setting: 397@-5,507@-5;15(0/2/0,.2/. 1 /1,. 1 /2. 1 /2)
Played when a feature is implemented. Default setting:
350@-4;*(. 1 /. 1 /1)
Description
Cadence script for distinctive ring 1. Default setting:
60(2/4)
Cadence script for distinctive ring 2. Default setting:
60(.8/.4,.8/4)
Cadence script for distinctive ring 3. Default setting:
60(.4/.2,.4/.2,.8/4)
Cadence script for distinctive ring 4. Default setting:
60(.3/.2,1/.2,.3/4)
4
77