Cisco SPA112 Administration Manual page 111

Configuring Voice
Configuring Voice Settings
Cisco SPA100 Series Phone Adapters Administration Guide
Field
Media Loopback
Mode
Media Loopback
Type
Distinctive Ring Settings
Caller number patterns are matched from Ring 1 to Ring 8. The first match (not the
closest match) will be used for alerting the subscriber.
Field
Ring1 - 8 Caller
Ring Settings
Field
Default Ring
Default CWT
Hold Reminder
Ring
Call Back Ring
Cfwd Ring Splash
Len
Cblk Ring Splash
Len
Description
The loopback mode to assume locally when making call to
request media loopback. Choices are: Source and Mirror.
Default setting: Source
NOTE If the SRP answers the call, the mode is determined
by the caller.
The loopback type to use when making call to request
media loopback operation. Choices are Media and Packet.
Default setting: Media
Note that if the SRP answers the call, then the loopback
type is determined by the caller (the SRP always picks the
first loopback type in the offer if it contains multiple type)
Description
Caller number pattern to play Distinctive Ring/CWT 1, 2, 3,
4, 5, 6, 7, or 8. Default setting: blank
Description
Default ringing pattern, 1–8, for all callers. Default setting:
1
Default CWT pattern, 1–8, for all callers. Default setting: 1
Ring pattern for reminder of a holding call when the phone
is on-hook. Default setting: 8
Ring pattern for call back notification. Default setting: 7
Duration of ring splash when a call is forwarded (0 – 10.0s)
Default setting: 0
Duration of ring splash when a call is blocked (0 – 10.0s)
Default setting: 0
4
111