Cisco SPA112 Administration Manual page 109

Configuring Voice
Configuring Voice Settings
Cisco SPA100 Series Phone Adapters Administration Guide
Field
Cfwd No Ans
Delay
Selective Call Forward Settings
Field
Cfwd Sel 1 -8 Caller
Cfwd Sel 1 -8 Dest
Speed Dial Settings
Field
Speed Dial 2-9
Supplementary Service Settings (User)
Field
CW Setting
Block CID Setting
Block ANC Setting
DND Setting
CID Setting
CWCID Setting
Dist Ring Setting
Description
Delay in sec before Call Forward No Answer triggers.
Same as Cfwd All Dest. Default setting: 20
Description
Eight PSTN Caller Number Patterns to be blocked for VoIP
gateway services or forwarded to a certain VoIP number. If
the caller is blocked, the ATA will not auto-answers the call.
Eight VoIP destinations to forward a PSTN caller matching
Cfwd Sel x Caller parameter.
the
PSTN caller is blocked for VoIP service.
Description
Target phone number (or URL) assigned to speed dial 2, 3,
4, 5, 6, 7, 8, or 9. Default setting: blank
Description
Call Waiting on/off for all calls. Default setting: yes
Block Caller ID on/off for all calls. Default setting: no
Block Anonymous Calls on or off. Default setting: no
DND on or off. Default setting: no
Caller ID Generation on or off. Default setting: yes
Call Waiting Caller ID Generation on or off. Default setting:
yes
Distinctive Ring on or off. Default setting: yes
4
If this entry is blank, the
109