Cisco SPA112 Administration Manual page 101

Configuring Voice
Configuring Voice Settings
Cisco SPA100 Series Phone Adapters Administration Guide
Field
Feature Dial Serv
Service Announcement
Serv
Streaming Audio Server (SAS)
Field
SAS Enable
SAS DLG Refresh Intvl
Description
Enable Feature Dial Service. See the Feature Dial
Services Codes parameter For more information.
Default setting: Yes
Enable Service Announcement Service. Default
setting: no
Description
To enable the use of the line as a streaming audio
source, select yes. Otherwise, select no. If
enabled, the line cannot be used for outgoing
calls. Instead, it auto-answers incoming calls and
streams audio RTP packets to the caller. Default
setting: no.
If this value is not zero, it is the interval at which
the streaming audio server sends out session
refresh (SIP re-INVITE) messages to determine
whether the connection to the caller is still active.
If the caller does not respond to the refresh
message, the ATA ends this call with a SIP BYE
message. The range is 0 to 255 seconds (0
means that the session refresh is disabled)
Default setting: 30.
4
101