Yamaha A4000 Owner's Manual page 71

[F3] SEQUENCE Button (page 194)
Allows recording and playback of performance data from an external MIDI controller.
[F4] MASTER Button (page 195)
Includes functions affecting overall operation of the A5000/A4000.
[F5] SYSTEM Button (page 197)
Overall system operation and display settings.
[F6] MIDI Button (page 200)
A wide range of functions affecting MIDI reception and transmission.
THE COMMANDS [COMMAND/EXIT] (page 203)
The COMMANDS include program and sample copy, edit, and a range of operations not included in
the function displays.
The first 16 commands — COPY through REVERT — are accessed when the [COMMAND/EXIT]
button is pressed from the PLAY, EDIT, or UTILITY mode. The remaining 6 commands — FORMAT
through LOAD OS — and the SAVE command are accessed when the [COMMAND/EXIT] button is
pressed from the DISK mode.
COPY (page 206)
Copies all or specified programs or samples (sample banks) in memory to different programs or
samples (sample banks).
DELETE (page 208)
Deletes the specified sample (sample bank) or sequence from memory.
SAVE (page 208)
Saves data from memory to disk.
ARRANGE (page 211)
Automatically remaps the samples assigned to a specified program or sample bank.
FREEZE (page 212)
Causes the easy edit settings to be actually applied to the samples or sample banks, or the sample
banks settings to the samples it contains.
REGISTER (page 214)
Registers the settings of the selected program or sample as the initial values.
BULK DUMP (page 216)
Allows bulk transmission of program or sample data in memory via the MIDI OUT connector.
INITIALIZE (page 217)
Initializes a single specified program or all programs in memory.
PROCESS (page 218)
Applies normalization, reverse, fade, loop crossfade, etc., to samples.
LOOP DIVIDE (page 221)
Divides the wave data between the sample loop start and loop end points into equal segments
which become independent samples.
RESAMPLE (page 222)
Applies time stretch and pitch conversion to samples. Time stretch changes the length of samples
without changing their pitch, while pitch convert changes the pitch of samples without changing
their length.
Chapter 3 The A5000/A4000 System & Features
A5000/A4000 •
2. The A5000/A4000 Functions
71