Yamaha A4000 Owner's Manual page 109

Knob 2
[ Turn] ADInput-R Output1 (A/D Input Right Output 1)
Sets the output destination of the signal received at the
"R" A/D input jack.
[Range] off, StereoOut, AsgnOutL&R, AsgnOut1&2,
AsgnOut3&4, AsgnOut5&6, DIG&OPT, Ef1 — Ef6
(Ef1 — Ef3 on the A4000)
The settings are the same as for the Cursor
ADInput-L Output1 parameter (page 108).
Knob 3
[ Turn] ADInput-R Output Level1
(A/D Input Right Output Level 1)
Sets the level of the signal sent to the output destination
specified by the ADInput-R Output1 parameter.
[Range] 0 — 127
[ Press] QUICK...
Calls the quick entry menu (page 83).
• When both the Output1 and Output 2 parameters are
set to the same output destination, the higher of the
two output level settings (Output Level 1 and Output
Level2) will take priority.
Knob 4
[ Turn] ADInput-R Output2 (A/D Input Right Output 2)
Sets the output destination of the signal received at the
"R" A/D input jack.
[Range] off, StereoOut, AsgnOutL&R, AsgnOut1&2,
AsgnOut3&4, AsgnOut5&6, DIG&OPT, Ef1 — Ef6
(Ef1 — Ef3 on the A4000)
The settings are the same as for the Cursor
ADInput-L Output1 parameter (page 108).
Knob 5
[ Turn] ADInput-R Output Level2
(A/D Input Right Output Level 2)
Sets the level of the signal sent to the output destination
specified by the ADInput-R Output2 parameter.
[Range] 0 — 127
[ Press] QUICK...
Calls the quick entry menu (page 83).
• When both the Output1 and Output 2 parameters are
set to the same output destination, the higher of the
two output level settings (Output Level 1 and Output
Level2) will take priority.
w
w
PLAY-SETUP
Chapter 4 PLAY Mode
A5000/A4000 •
109