Yamaha A4000 Owner's Manual page 193

Knob 3
[ Turn] MIDI Out
Specifies the MIDI connector via which the function but-
ton note-on data will be transmitted.
[Range] A MIDIOUT, B
• A MIDIOUT ... The note-on data from function
buttons set to MIDI channels A01 — A16 will
be transmitted via MIDI OUT. The note-on
data from function buttons set to MIDI chan-
nels B01 — B16 will affect playback of the
A5000 only.
• B MIDIOUT ... The note-on data from function
buttons set to MIDI channels B01 — B16 will
be transmitted via MIDI OUT. The note-on
data from function buttons set to MIDI chan-
nels A01 — A16 will affect playback of the
A5000 only.
• The A4000 does not have this parameter.
Cursor w
Cursor
w
Knob 1 Knob 2
Turn Funktion
Cursor/Page
action Key#
Press
Tree View —
action
Knob 1
Same function as Cursor
Knob 2
[ Turn] Function Key# (Function Key Number)
Selects the function button (1 — 6) to be set up for note-
on transmission. Values "1" through "6" correspond to
function buttons [F1] through [F6].
[Range] 1 — 6
• After selecting the function button to be set up for
note-number transmission, use Knobs 3 — 5 to set
the note number, MIDI channel, and velocity, as
required.
Knob 3
[ Turn] Note
Use this knob to set the note to be played by the selected
function key. The setting determines the note value that
the key transmits when sending a Note-On message.
[Range] C-2 — G8
• If the Note Display Type utility (UTILITY-SYSTEM-
Custom: page 198) is set to "name" the parameter
will be displayed as note names such as "C3." If set
to "number" the parameter will be displayed as MIDI
note numbers such as "60."
MIDIOUT
Knob 3 Knob 4 Knob 5
Note Velocity MIDI Channel
MIDI MIDI MIDI
q
(page 192).
[ Press] MIDI
When this knob is pressed the parameter can be directly
set by a MIDI note-on message received from an external
MIDI device. See page 82.
Knob 4
[ Turn] Velocity
Use this knob to set the velocity for selected function key.
The setting determines the velocity value that the key
transmits when sending a Note-On message.
[Range] 1 — 127
[ Press] MIDI
When this knob is pressed the parameter can be directly
set by a MIDI note-on message received from an external
MIDI device. See page 82.
Knob 5
[ Turn] MIDI Channel
Use this knob to set the "Transmit" channel for the
selected function key. The setting determines the MIDI
channel over which the Note-On message is transmitted.
Set the value to Bch if you want to use the channel
selected by the BasicCh parameter (page 89).
[Range] A01 — B16 (01 — 16 on the A4000), Bch
[ Press] MIDI
When this knob is pressed the parameter can be directly
set by a MIDI note-on message received from an external
MIDI device. See page 82.
• When setting the MIDI channel via MIDI on the
A5000, receive the appropriate MIDI messages via
the MIDI IN-A connector to set channels A01 — A16,
and via the MIDI IN-B connector to set channels B01
— B16.
A5000/A4000 •
UTILITY-PANEL PLAY
Chapter 8 UTILITY Mode
193