Effect Setup B; Effect Edit; Efsetupb * Not Available On The A4000; Efedit - Yamaha A4000 Owner's Manual

PLAY-EFFECT

Effect Setup B

[PLAY] button [F4] button
"PLAY-EfSetupB"
(This function is not available on the A4000.)
EFFECT SETUP B provides access to the Effect 4 — 6 effect
types and three different effect connection types.
Knob 1 Knob 2
Turn
Cursor/Page Effect Type
action
Press
Tree View LIST...
action
Knob 1
[ Turn] Cursor/Page
Positions the cursor to select effect 4 — 6, and selects
display pages.
[ Press] Tree View
Calls the Tree View display (page 83).
Knob 2
[ Turn] Effect Type
Select the effect type to be applied as Effect 4 — 6. For
information about available selections, refer to the "Effect
type list" in the appendix. (page 256)
[ Press] LIST... (Effect Type List)
Shows a list of the effect types.
Knob 3
[ Turn] Effect Output
Selects the output destination for Effect 4 — 6.
[Range] StereoOut, AsgnOutL&R, AsgnOut1&2,
AsgnOut3&4, AsgnOut5&6, DIG&OPT
• StereoOut ... Output is sent to the rear-panel STE-
REO OUT jacks as well as the front-panel
PHONES jack.
• AsgnOutL&R ... The rear-panel assignable output
jacks.
• AsgnOut1&2, AsgnOut3&4, AsgnOut5&6 ... The
corresponding assignable outputs on the
optional AIEB1 I/O expansion board.
• DIG&OPT ... The coaxial and optical digital outputs
on the optional AIEB1 I/O expansion board.
• When the output is connected to another effect " -----
------" will appear on the display and the effect output
can not be selected.
• The AsgnOut1&2, AsgnOut3&4, AsgnOut5&6, and
DIG&OPT output destinations cannot be selected
unless the optional AIEB1 I/O expansion board is
installed.
104
Chapter 4 PLAY Mode
Knob 1 to select
Knob 3 Knob 4 Knob 5
Effect1...3 Effect4...6
Effect Output
Connect Connect
Effect4 Effect2 Effect3
BYPASS BYPASS BYPASS
• A5000/A4000
[ Press] Effect4 BYPASS
The Effect4 effect type display will appear as " (Bypass)"
and Effect4 will be temporarily bypassed (no effect).
Press a second time to to re-engage the effect.
Knob 4
[ Turn] Effect1 — 3 Connect
Same function as EFFECT SETUP A Knob 4 (page 103).
[ Press] Effect5 BYPASS
The Effect5 effect type display will appear as "(Bypass)"
and Effect5 will be temporarily bypassed (no effect).
Press a second time to to re-engage the effect.
Knob 5
[ Turn] Effect4 — 6 Connect
Same function as EFFECT SETUP A Knob 5 (page 103).
[ Press] Effect6 BYPASS
The Effect6 effect type display will appear as " (Bypass)"
and Effect6 will be temporarily bypassed (no effect).
Press a second time to to re-engage the effect.

Effect Edit

[PLAY] button [F4] button
EfEdit (Effect Edit) provides access to set parameter values
for the selected effect (Effect 1 — 6)(1 — 3 on the A4000).
You can access and set all of the effect's parameters.
• Use this page to edit the effects selected for the current program.
The page's appearance and operation varies according to whether
"EffectEditType" value is set to "full" or "favorite".
Cursor q
(The same when Effect Edit Type is =full or Favorite)
Cursor
q
Knob 1 Knob 2
Turn
Cursor/Page —
action
Press
Tree View —
action
Knob 1
[ Turn] Cursor/Page
Positions the cursor and selects display pages.
[ Press] Tree View
Calls the Tree View display (page 83).
Knob 1 to select "PLAY-EfEdit"
q
Knob 3 Knob 4 Knob 5
Effect Edit
— —
Type
— — —