Yamaha A4000 Owner's Manual page 269

93: TEMPO AUTO WAH
1 LFO Depth 0 — 127
2 LFO Frequency 32nd note — 1/4 note x 16
3 Cutoff Freq Offset 0 — 127
4 Resonance 1 — 12.0
@5 LFO Init Phase 0deg, 90deg, 180deg, 270deg
6 EQ Low Frequency 32Hz — 2.0kHz
7 EQ Low Gain -12dB — +12dB
8 EQ High Frequency 500Hz — 16.0kHz
9 EQ High Gain -12dB — +12dB
10 Dry/Wet Balance D63>W — D=W — D<W63
11 LFO Reset (Ctrl)
Synchronizes to external MIDI clock when Program LFO sync is set to "MIDI," and to the Program LFO tempo when set to "Manual."
The initial phase of the LFO modulation waveform can be reset from a MIDI controller.
In order to do this the controller to be used must be assigned to "E*-11" ("*" is the effect number used for this effect) via the program controller setup display. The phase is reset when
a corresponding MIDI control change message is received, regardless of the control change value.
94: TEMPO DIGITAL SCRATCH
1 Input Level 0 — 127
2 Initial Delay 0.1 — 460.0ms
3 Scratch Speed 32nd note — 1/4 note x 16
4 Scratch Depth 0 — 127
5 Scrch LFO Init Phase 0deg, 90deg, 180deg, 270deg
6 Auto Pan Speed 32nd note — 1/4 note x 16
7 Auto Pan Depth 0 — 127
8 Pan LFO Init Phase 0deg, 90deg, 180deg, 270deg
9 EQ Frequency 100Hz — 10.0kHz
10 EQ Gain -12 — +12dB
11 EQ Width 1.0 — 12.0
12 HPF Frequency thru, 20Hz — 8.0kHz
13 Dry/Wet Balance D63>W — D=W — D<W63
14 Scrch LFO Reset (Ctrl)
15 Pan LFO Reset (Ctrl)
Synchronizes to external MIDI clock when Program LFO sync is set to "MIDI," and to the Program LFO tempo when set to "Manual."
The initial phase of the LFO modulation and pan waveforms can be reset from a MIDI controller.
In order to do this the controller to be used must be assigned to "E*-14" or "E*-15" ("*" is the effect number used for this effect) via the program controller setup display. The phase is
reset when a corresponding MIDI control change message is received, regardless of the control change value.
95: TEMPO AUTO SYNTH
1 Mod Speed 0 — 127
2 Mod Wave Type TypeA,TypeB,TypeC,TypeD
3 Mod Depth 0 — 127
4 Mod Depth Ofst R -63 — +63
5 LPF Frequency 1.0kHz — 18.0kHz,thru
6 HPF Frequency thru,22Hz — 8.0kHz
7 Delay Time 0.1 — 370.0ms
8 Delay Time Ofst R 0 — -884
9 Feedback Level -63 — +63
10 Delay Level 0 — 127
11 AM Speed 32nd note — 1/4 note x 16
12 AM Wave tri,sine,saw up,saw down
13 AM Depth 0 — 127
14 AM Inverse R normal,inverse
15 AM Init Phase 0deg, 90deg, 180deg, 270deg
16 AM Reset (Ctrl)
Synchronizes to external MIDI clock when Program LFO sync is set to "MIDI," and to the Program LFO tempo when set to "Manual."
The initial phase of the LFO modulation waveform can be reset from a MIDI controller.
In order to do this the controller to be used must be assigned to "E*-16" ("*" is the effect number used for this effect) via the program controller setup display. The phase is reset when
a corresponding MIDI control change message is received, regardless of the control change value.
96: TEMPO FLANGING PAN
1 Dry/Wet Balance D63>W — D=W — D<W63
2 Flanger&Pan Speed 32nd note — 1/4 note x 16
3 Flanger Depth 0 — 127
4 Flanger Delay 0.1 — 180.0ms
5 Flanger Feedback -63 — +63
6 FlgPan Delay 0.1 — 180.0ms
7 FlgPan Feedback -63 — +63
@8 LFO Init Phase 0deg, 90deg, 180deg, 270deg
9 LPF Frequency 1.0kHz — 18.0kHz,thru
10 Delay Time 32th note — 1/4 note
11 Delay Feedback -63 — +63
12 Delay Level 0 — 127
13 AM Speed 32nd note — 1/4 note x 16
14 AM Depth 0 — 127
15 AM Init Phase 0deg, 90deg, 180deg, 270deg
16 LFO Reset (Ctrl)
Synchronizes to external MIDI clock when Program LFO sync is set to "MIDI," and to the Program LFO tempo when set to "Manual."
The initial phase of the LFO modulation waveform can be reset from a MIDI controller.
In order to do this the controller to be used must be assigned to "E*-16" ("*" is the effect number used for this effect) via the program controller setup display. The phase is reset when
a corresponding MIDI control change message is received, regardless of the control change value.
Wow filter control depth
Wow filter control frequency (specified by note length)
Wow filter control frequency offset
Wow filter bandwidth
Sets the initial phase of the LFO waveform
Frequency at which the EQ will boost/cut the low range
Gain with which the EQ will boost/cut the low range
Frequency at which the EQ will boost/cut the high range
Gain with which the EQ will boost/cut the high range
Balance of the dry sound and effect sound
Reset to initial phase (for MIDI control)
The degree of scratch effect
Delay time
Scratch modulation frequency (specified by note length)
Scratch modulation depth
Initial phase setting (Scratch LFO)
Auto-pan frequency (specified by note length)
Auto-pan depth
Initial phase setting (Pan LFO)
Frequency at which the EQ will boost/cut the mid range
Gain with which the EQ will boost/cut the mid range
Width of the mid range area which the EQ will boost/cut
Frequency at which the high pass filter will cut the low range
Balance of the dry sound and effect sound
Reset to initial phase (for MIDI control)
Reset to initial phase (for MIDI control)
Modulation speed
Modulation type
Modulation depth
Modulation depth in relation to right-channel offset
Frequency at which the low pass filter will cut the high range
Frequency at which the high pass filter will cut the low range
Delay time
Offset of R ch delay time
Feedback amount
Delay level
Modulation frequency specified by note length
Modulation waveform
Amplitude modulation depth
Inverts the phase of the left and right channels of the modulation waveform
Sets the initial phase of the modulation waveform
Reset to initial phase (for MIDI control)
Balance of the dry sound and effect sound
Delay modulation frequency specified by note length
Delay modulation depth
Delay time
Feedback amount
Delay time
Feedback amount
Sets the initial phase of the LFO waveform
Frequency at which the low pass filter will cut the high range
Delay time specified by note length
Feedback amount
Delay level
Amplitude modulation frequency specified by note length
Amplitude modulation depth
Sets the initial phase of the modulation waveform
Reset to initial phase (for MIDI control)
Effect Parameter List
269
Appendix
A5000/A4000 •