Hoisting The Ess - Huawei LUNA2000-2.0MWH Series User Manual

LUNA2000-2.0MWH Series Smart String ESS
User Manual
Procedure
Step 1 Determine the reference points for installing the ESS on the concrete platforms.
Mark the reference points using a marker.
Step 2 On the basis of the reference points, mark the mounting positions for the four
corner fittings of the ESS using an ink fountain and a long soft measure tape.
When marking the positions for corner fittings, ensure that the four lines form a
rectangle.
Figure 5-1 Position of corner fittings
----End

5.3.2 Hoisting the ESS

Prerequisites
●
●
●
●
●
●
Issue 15 (2023-11-01)
NO TICE
Before installing the equipment, check the ESS for damage, such as holes and
cracks, and check the equipment model. If the appearance is abnormal or the
equipment model is incorrect, contact your dealer.
Before hoisting, ensure that the crane and hoisting ropes meet the load-
bearing requirements.
The steel hoisting ropes are available.
An appropriate crane is selected based on standards of the crane company
and assessed by professionals onsite.
The doors of the ESS to be hoisted have been closed.
It is recommended that the ESS be hoisted outdoors when the weather is
clear and there is no wind.
Copyright © Huawei Technologies Co., Ltd.
5 Installation
116