Table of Contents
Advertisement
5.4
Device startup
Condition
You have read the Basic Safety Notes (Page 85).
Procedure
1. Power-on the device.
For an initial startup, prompts for each of the following steps appear after power-on.
2. Set the language.
The first time the device is configured, you will be prompted to set the language. The
parameter "Language" always appears in English. To change the language again (after initial
setup), see parameter Language in FST030 HMI export in SIOS
support.industry.siemens.com/cs/document/109793928).
3. Set the date and time.
The correct date and time should be set prior to configuring the device.
4. Run the "Quick commissioning wizard".
Essential parameters should be considered before using the device for the first time.
For any subsequent startup, after power-on, the device automatically starts in operation
view. A transition screen showing first the Siemens logo and then the current firmware
revision of the product is displayed while the first measurement is being processed.
SITRANS FS130 & FS230
Compact Operating Instructions, 12/2023, A5E38755607-AF
Commissioning
5.4 Device startup
(https://
89
Advertisement
Table of Contents
