Configuration Software configuration
Relay output
Normally open
Relay output
Normally
closed
4.7.7
Connecting channels 5 and 6 (internal DSL only)
Connecting RTD (Resistance Temperature Detector) cable
Perform the following steps for each RTD cable.
1. Loosen the four lid screws and open lid.
2. Remove cap and ferrule from cable gland and slide onto cable.
3. Remove one of the blind plugs (
4. Push cable through gland opening.
SITRANS FS130 & FS230
Compact Operating Instructions, 12/2023, A5E38755607-AF
Alarm class
Alarm item
NAMUR status signals
Alarm class
Alarm item
NAMUR status signals
④
or
4.7 Connecting wall mount enclosure
Channel
2
3
4
X
X
Normally open
X
X
Normally closed
⑤
) and fit cable gland.
Connecting
ChX-
ChXC
+
-
ChX+
ChX-
ChXC
+
-
ChX+
79