Table of Contents
Advertisement
6 FORK, TRIPLE CLAMP
27
Tighten
sleeve
©.
Guideline
Hydrostop unit sleeve
M6x0.5
6 Nm (4.4 Ibf ft)
6.18
piston rod, assembling
Info
The steps are identical for both fork legs, except for the hydrostop needle and valve.
I
Degrease the piston rod.
Clamp the piston rod with the special tool.
Clamping stand (T14049S) (KJ1 p. 334)
v
Grease O-ring. Mount valve needle O
in
the piston rod.
Lubricant (T158) (IS p. 318)
201790-10
Mount spring
©
Mount and tighten adapter
©
with spring ©.
Guideline
0
©
-
ikV
i
Adapter of piston rod
M6x0.5
12 Nm (8.9 Ibf ft)
0
j
R00033-10
Position the spring.
Mount compression shim stack
©
with the smaller shims facing downward.
f
1.-----0
Info
Note the setting list.
i
r
-f*
x
R00031-10
Grind the piston on both sides on a surfacing plate using 1200 grit sandpaper.
Clean the piston.
Lubricate the piston ring.
o
4*
Fork oil (SAE 4) (48601166S1) (Pi p. 316)
Mount the piston with chamfer facing down.
-ifi
R00034-10
Mount rebound shim stack
©
with the smaller shims facing upward.
0
Info
Note the setting list.
i
B04094-10
Advertisement
Table of Contents
