Installing The Starter Motor; Installing The Valve Cover; Installing The Spark Plugs; Removing The Engine From The Engine Assembly Stand - Husqvarna 701 Enduro 2017 Repair Manual

18 ENGINE
224
18,5,32 Installing the starter motor
—
Grease the O-ring and mount the starter motor.
Long-life grease (BJ p. 318)
Mount and tighten oil throttle O-
Guideline
Loctite® 243™
Screw, starter motor with
oil throttle
M6 10 Nm
(7.4 Ibf ft)
I
311731-10
18.5.33 Installing the valve cover
Position the valve cover with the gasket.
Mount and tighten screws Q.
Guideline
(
Screw, valve cover 10 Nm (7.4 Ibf ft) M6
i
3 Rfe
311733-10
18.5.34 Installing the spark plugs
Mount and tighten spark plug O using the special tool.
Guideline
Spark plug inside M12x1.25 18 Nm (13.3 Ibf ft)
<s
Spark plug wrench (75029172000) (US p. 328)
0
Mount and tighten spark plug
0
using the special tool.
Guideline *
Spark plug outside 11 Nm (8.1 Ibf ft) M10x1
311732-10
Spark plug wrench (75029172000) p. 328)
18.5.35 Removing the engine from the engine assembly stand
Remove the engine from the engine assembly stand.
Info
Have an assistant help you or use a motorized hoist.
I
m,
_
311725-11 _