Checking The Basic Operation Procedure - Canon RC-IP1000 User Manual

Checking the Basic Operation Procedure

Turning on the device (P. 24).
1
• If there are already registered cameras in the selected group, connection will be automatic.
Turning on the power of the cameras (P. 44).
2
Selecting cameras (P. 28, P. 47).
3
• The lamps on the CAMERA / PRESET Select area (P. 11) allow you to check the CAMERA / PRESET selection
status.
• You can control multiple cameras simultaneously (P. 51).
Displaying camera video on the LCD panel (P. 35).
4
Adjusting the camera's orientation (P. 13).
5
Adjusting the zoom (P. 14).
6
7 Adjusting the exposure (P. 14, P. 72).
Adjusting the focus (P. 14, P. 73).
8
9 Turning off the device (P. 24).
• Turning off the device will not turn off connected cameras.
• For details on camera power control refer to "Controlling Camera Power: On / Standby" (P. 44).
• The last camera/group selected is remembered.
46