Checking The Operation After Making The Settings - Canon imagePASS-P2 Service Manual

Check that the items in the General Setup are set, and
perform [Save Changes] even if there is no change.
The setting will not be completed unless [Save Changes]
is pressed.
5. Press [Exit Setup] after all settings are completed.
6. The confirmation screen will appear, and then press
[Reboot Now].
7. The equipment will be restarted (approx. 10 min.).
Checking the Operation After
Making the Settings
Output Test Page and Configuration by the following
procedure, and check the connection between the host
machine and this equipment as well as the settings of
this equipment.
1. Select [Fiery] from the main menu on the host
machine's LCD.
2. Select [Login] to log in as a system administrator.
Entering "Fiery.1" in the password field displays the
setting screen.
3. Select [Info] > [Print Pages] > [PS Test Page].
86
6. INSTALLATION PROCEDURE