Table of Contents
Advertisement
15
CAMERA / PRESET Status Lamps
Indicate the status of the camera/preset
corresponding to each number in the currently
selected camera group/preset group.
CAMERA / GROUP Select Mode
Camera Status
Connected
On Standby
Receiving ALARM
Without connection,
powered off.
PRESET / GROUP Select Mode
Camera Status
Registered preset
available
No registered preset
16
CAMERA / PRESET Select Buttons 1 to 10
Select the camera, camera group, preset and
preset group controlled by the device. Use the
SELECT button to change the selection.
CAMERA GROUP / PRESET GROUP Select
Selects the CAMERA GROUP / PRESET GROUP.
During group 11-20 selection mode (the 11-20
lamp illuminates), groups 11 to 20 can be
selected.
Condition
Selected
Not selected
• Once a group is selected, the mode changes
to CAMERA or PRESET selection mode.
CAMERA Select
Selects the cameras to be controlled by the
device.
When the camera is on standby, pressing and
holding down the button starts the camera.
When the top menu is being displayed and the
camera is on, pressing and holding down the
button puts the camera on standby.
Condition
Selected
PGM Tally ON (Not
selected)
PVW Tally ON (Not
selected)
• Illuminates in orange if a camera (when the tal-
ly is on) is selected.
• Illuminates in red if both PGM tally and PVW
tally are on.
Illumination
(Green light on)
(Orange light on)
(Red light on)
(Off)
Illumination
(Green light on)
(Off)
Illumination
(Orange light on)
(Blue light on)
Illumination
(Orange light on)
(Red light on)
(Green light on)
12
PRESET Select
Selects/executes a preset.
Pressing and holding down a button without an
assigned preset registers the current settings in
the preset.
Pressing a button while the F1 dial is pressed
registers (and overwrites) the button's preset.
Pressing a button while the F4 dial is pressed
deletes the button's preset.
Condition
Selected
17
SELECT Button
Used to choose the selection target for CAMERA /
PRESET Select Buttons 1-10. Every time the
SELECT button is pressed, the target selection
changes in the following order.
CAMERA / GROUP Select Mode
CAMERA
CAMERA GROUP 1-10
GROUP 11-20
back to the beginning.
PRESET / GROUP Select Mode
PRESET
PRESET GROUP 1-10
beginning.
Additionally, pressing and holding down the button
switches between CAMERA / GROUP selection
mode and PRESET / GROUP selection mode.
Condition
Selection target: GROUP
Selection target:
CAMERA or PRESET
• You can switch between the SELECT button's
normal press and long press operations from
[SELECT] (P. 60) in the SYSTEM menu.
18
Group Lamps 1 to 10, 11-20 Lamp
Indicates the selected group. When the 11-20
lamp is illuminated, the group lamps 1 to 10
indicate the status of groups 11 to 20.
Condition
Selected
Illumination
(Orange light on)
CAMERA
back to the
Illumination
(Orange light on)
(Off)
Illumination
(Green light on)
Advertisement
Table of Contents
