Table of Contents
Advertisement
Controlling Camera Power: On / Standby
Operating the Menu to Control Camera Power: On / Standby
From the device, you can switch the power of cameras between on and standby. The cameras to be controlled can be
selected from the currently selected camera, cameras belonging to the currently selected group, or all cameras that have
been registered.
Controlling the power of the selected camera
Select the CAMERA menu > [Camera Control] tab.
1
• Proceed to step 3.
Controlling the power of a camera group or all cameras
Select the CAMERA menu > [Batch Camera Control] tab.
1
Select [Control Range].
2
• You can choose between controlling the selected group, or all cameras.
Select [Power On] or [Standby].
3
• When selecting [Standby], touch [OK] once the confirmation screen is displayed.
• The power of the cameras specified as target will change to on or standby.
Using the CAMERA / PRESET Select Buttons to Control Camera Power:
On / Standby
During camera selection mode, you can use the CAMERA / PRESET Select buttons to switch the power of the cameras
between on and standby from the device.
Condition
Camera on standby
Camera powered on, when the top menu is
displayed
CAMERA / PRESET Select button operation
Press down and hold the button to turn on the power.
Press down and hold the button
camera to standby.
44
touch OK to set the
Advertisement
Table of Contents
