Table of Contents
Advertisement
Set a certificate in case of SSL communication (P. 42).
8
Note
• To unregister a camera.
– Set [Connection Type] to [None] to unregister a camera.
Inputting the IP Address
Select the [IPv4 Address] line.
1
• Here, you can also turn the F1-F4 dials to input numbers.
Press the F1-F4 dials or touch the desired IPv4 address.
2
• The IPv4 address input screen is displayed.
Touch the onscreen numbers to input the four numbers of the IPv4 address.
3
• If you press the F1-F4 dials, the cursor moves to the beginning of the corresponding number.
• Touch ⌫ to delete a character to the left of the cursor.
• You can also turn the F1-F4 dials to input numbers.
Touch [OK] or press the SET button.
4
• If you touch [Cancel] or press the BACK button the input operation will be interrupted.
Note
When inputting an IPv6 address, select [IPv6 Address] to display the IPv6 address input screen. Touch the onscreen numbers,
letters (A to F) and colon (":") to input the IPv6 address, then touch [OK].
41
Advertisement
Table of Contents
