Canon RC-IP1000 User Manual page 28

Camera List Screen Display/Operation
This section explains about the display/operation of the Camera List screen.
1
2
1
CAMERA Select Buttons
Camera selection buttons (showing the camera
number) are displayed. 50 buttons are displayed
per page.
You can touch the buttons to select the desired
camera.
Normal
(Multi Control:
Off)
Camera
registered (not
selected)
Camera
registered
(selected)
–
Camera not
registered (not
selected)
Camera not
registered
(selected)
–
Operation of the CAMERA select buttons depends
on the [Multi Control] settings.
Multi Control
Camera registered (not
selected)
Camera registered
Control target
Camera registered
(selected)
Camera not registered
(not selected)
Camera not registered
Control target
Camera not registered
(selected)
28
Multi
Setting values / Description
Control
Off If you press a CAMERA select
Group button in the same group as the
currently selected camera:
The corresponding camera is
selected.
If you press a CAMERA select
button in a different group from the
currently selected camera:
The corresponding camera is
selected, and the camera
group is switched.
Select If you press a CAMERA select
button in the same group as the
currently selected camera:
The corresponding camera is
selected for Multi Control.
Press the button again to can-
cel the selection.
If you press a CAMERA select
button in a different group from the
currently selected camera:
The corresponding camera is
selected, and the camera
group is switched.
2
Multi Control
Turning the F1 dial switches the Multi Control
mode. The settings are common to the [Multi
Control] setting on the PICTURE screen.
3
Page Switch / Buttons, Current Page
Position/Total Page Number
Switches to the previous/next page. You can also
switch lists using the
operation area.
3
/ buttons on the menu