Advertisement
How to Configure IP Passthrough
To configure IP Passthrough for your router,
1. Connect your router to another networking device, such as a router,
CPE, gateway, or modem via the WAN port (the red one) by using the
supplied Ethernet cable
2. Open a web browser and enter the router's default address
http://192.168.0.1 in the address bar.
3. Log in using the default password (check the product label on the
back side of the router abeled Admin URL and Admin password).
4. When entering the Web UI, use the Menu at the left side and go to
>
Network
5. Use the toggle switch to enable or disable IP Passthrough function.
>
WAN.
3
Advertisement
