Agent Level Sensor; Tilt Switch Lu - GE Tec 6 Plus Operation And Maintenance Manual

Description
Agent level sensor An agent level sensing probe measures the agent level. The power
must be on for the agent level sensor to activate. If the sump contains
between 60 and 390 ml of agent, the LCD level displays the agent lev-
el in the sump. For more information, see section 3, Controls and Indi-
cators.
Tilt switch | lfthe vaporizer is tilted for 10 seconds while the dial is on and it is in
operational mode and delivering vapor, vapor delivery will be stopped,
as indicated by the flashing NO OUTPUT light and auditory alarm.
D
DESFLURANE
NİZ
в 圖
NO OUTPUT
Figure 2-6 « Tilt indicator (NO OUTPUT light)
1107-0641-000 1/23/01 2-9