Blomberg KWN 2400XN User Manual page 28

3. Thread the union onto the water hose.
4. Thread the union onto the faucet ad-
apter and tighten by hand/tool.
5. Secure the water hose in suitable
places with the clips provided to pre-
vent damage, slipping or accidental
dislodging.
WARNING
After opening the faucet, make sure
that there is no water leakage at
both joints of the water hose. In
case of leakage, close the valve im-
mediately and tighten all joints with
a pipe wrench or pliers.
For products to be used in carboys;
(This feature is optional)
In order to connect carboy water to the
product, the water pump recommended by
the authorized service is required.
In order to connect carboy water to the
product, the water pump recommended by
the authorized service is required.
1. After connecting one end of the water
hose from the pump to the product, fol-
low the instructions below.
2. Make the connection by pushing the
other end of the water hose into the
water hose inlet of the pump.
EN / 28
EN
DA
FI