Maintenance And Cleaning - Blomberg KWN 2400XN User Manual

Do not use the first 10 glasses of
water after connecting the filter.
1. For filter installation, the "Ice Off" in-
dicator must be active. Switching
between ON and OFF indicators on the
display is done by pressing the "Ice"
button.
2. Remove the crisper compartment to
access the water filter.
3. Remove the water filter by-pass cover
by pulling it towards you.
It is normal for a few drops of water
to come out after the cover is re-
moved.
4. Insert the water filter cover into the
mechanism and push it forward to lock
it in place.

10 Maintenance and Cleaning

WARNING:
Read the "Safety Instructions" sec-
tion first.
WARNING:
Unplug the refrigerator before
cleaning it.
5. Exit the "Ice Off" mode by pressing
the "Ice" button on the display again.
The water filter removes some for-
eign particles from the water. It
does not purify the water from mi-
croorganisms.
• Do not use sharp or abrasive tools to
clean the product. Do not use materials
such as household cleaning agents,
soap, detergents, gas, gasoline, thinner,
alcohol, wax, etc.
• The dust shall be removed from the vent-
ilation grill on the rear of the product at
least once a year (without opening the
cover). Clean the product with a dry cloth.
EN / 31
EN
DA
FI