Samsung AE050RXYDEG Installation Manual page 20

Installing the unit
Outdoor unit installation
The outdoor unit must be installed on a rigid and stable base to avoid any increase in the noise level and vibration,
particularly if the outdoor unit is to be installed in a location exposed to strong winds or at a height, the unit must be fixed to
an appropriate support(wall or ground) .
f Fix the outdoor unit with anchor bolts . f
• The anchor bolt must be 20mm or higher from the base
surface .
NOTE
• When tightening the anchor bolt, tighten the rubber washer
to prevent the outdoor unit bolt connection part from
CAUTION
corroding .
• Make a drain outlet around the base for outdoor unit
drainage .
• If the outdoor unit is installed on the roof, you have to check
the ceiling strength and waterproof the unit .
Outdoor unit support
OUTDOOR UNIT INSTALLED ON THE WALL BY RACK
f Ensure the wall will be able to suspend the weight of rack and outdoor unit ; f
f Install the rack close to the column as much as possible ; f
f Install proper grommet in order to reduce noise and residual vibration
f
transferred by outdoor unit towards wall .
When installing air guide duct
• Check and make sure that screws do not damage the copper pipe .
CAUTION
• Secure air guide duct on guard fan .
Anchor bolt hole
ENGLISH-20
660
880
Outdoor
unit
Outdoor unit
Anchor bolt
support
Base surface
Designed to
cut off residual
vibration from
outdoor unit to
rack . (not supplied
with product)
Soft rubber designed to cut off
vibration from rack to wall . (not
supplied with product)
(Unit : mm)