Replacing the Center Bulbs
Models 68007C and 68008C only
Note:
Each center bulb is integrated into the lens.
1.
Push 1 of the tabs over that holds the lens
assembly in place, and pull the lens away from
the rest of the center-light assembly
Figure 58
2.
Disconnect the wire connector from the lens
assembly.
3.
Connect the wire connector to a new lens
assembly, and install the lens assembly onto the
rest of the center-light assembly
Figure 59
Cleaning
Cleaning the Machine
Regular cleaning and washing with mild detergent and
water increases the life span of the machine. Clean
(Figure
58).
the machine after each use before the dirt hardens.
Remove dirt and grime from the external parts of the
entire machine, especially the engine. Clean dirt and
concrete materials from the outside of the engine.
Ensure that the fuel cap and the oil-fill cap/dipstick are
secure to avoid getting water in the engine.
Use care when using a high-pressure sprayer
g021019
because it can damage the safety decals, instruction
signs, and the engine.
Important:
cleaning; refer to
30).
(Figure
59).
g021021
39
Lubricate the bearings and seals after
Lubricating the Machine (page