Replacing The Light Bulbs; Replacing The Rear-Facing Side Bulbs; Replacing The Side-Facing Bulbs - Toro 68004C Operator's Manual

Replacing the Light
Bulbs
Replacing the Rear-facing
Side Bulbs
Note:
The left rear-facing bulb also illuminates
license plate.
1. Use a screwdriver to remove the 4 screws from
the large square lens on the light
Figure 56
2. Remove the lens
3. Push and twist the bulb counterclockwise to
remove it from the socket
4. Push a new 1157 bulb into the socket and then
twist it clockwise
5. Install the lens and the 4 screws
(Figure
(Figure 56).
(Figure 56).
(Figure 56).
(Figure
Replacing the Side-facing
Bulbs
1. Use a screwdriver to remove the 2 screws from
the small rectangular lens on the side of the light
(Figure
56).
2. Remove the lens
3. Pull the bulb out of the socket
4. Push a new 168 bulb into the socket
g020829
5. Install the lens and the 2 screws
56).
38
57).
Figure 57
(Figure 57).
g020830
(Figure 57).
(Figure 57).
(Figure 57).