Table of Contents
Advertisement
12. Work light button (Not available)
13. Lift rollers up/down switch (Not available)
14. Coolant on/off button
Flip the switch to the right to turn on the coolant pump; to the left to turn it off.
A started blade will also start the coolant automatically.
Blade Descend Pressure and Speed
The part of control panel is where cutting pressure and saw blade descend speed can be adjusted.
1
2
Cutting pressure and speed control panel
1. Cutting pressure control knob
This pressure control knob is used to adjust the cutting
pressure of the blade.
Turning the knob clockwise increases the cutting
pressure.
To obtain a good cutting result, choose the right cutting
pressure by turning the knob until it points to your
material on the color chart.
2. Blade descend speed control knob
This knob is used to adjust the descend speed of the
saw blade.
Turning the knob clockwise increases the blade
descend speed.
Blade descend speed is a determining factor to a good
cutting time and quality cutoff surface.
Set the blade descend speed in accordance with the
cutting pressure control knob.
Also commonly known as the flow control valve
4-7
Advertisement
Table of Contents
