Sharp SW-165HT Instruction Manual page 74

TERMINATING THE USE OF THE MACHINE
Waste disposal:
When your machine can not work anymore, you should
the oil in safe place with bottom tray. Ask a environment specialist to handle the oil. It can avoid soil
pollution. The oil list in machine:
 Hydraulic oil
 Cutting fluid
 Drive wheel gear oil
OIL RECOMMENDATION FOR MAINTENANCE
Item
Dovetail guide
Roller bearing
Bed roller / surface
Nipples of bearing
Blade tension device
Reducer
Hydraulic system
Inserts
Band wheel Oil with lubricant, but not excess.
Bearing
Cylinder
Wire brush Oil with lubricant, but not excess.
1. Turn off the stop circuit breaker switch before servicing the machine.
2. Then post a sign to inform people that the machine is under maintenance.
3. Drain all of the cutting fluid and oil off and carefully treat them to avoid pollution.
4. The machine must be either LOCKED OUT OR TAGGED OUT while under maintenance.
8-6
Method
Keep grease covered. Antirust.
Sweep clean and oil with lubricant.
Sweep clean and oil with lubricant.
Use grease gun, but not excess.
Use grease gun, but not excess.
Inspect once a week. Change oil of 600 hours of
using. Change it every year.
Inspect half a year. Change oil every year.
Oil with lubricant, but not excess.
Oil with lubricant, but not excess.
drain the oil from machine body. Please
Revolution Suggest oil
Daily
Daily
Daily
Monthly
Monthly
Regularly
Regularly
Daily
Weekly
6 Monthly
6 Monthly
store
Shell R2
SAE #10
SAE #10
Shell R2
Shell Alvania EP
Grease 2,
Mobil Mobilplex
48
Omala oil HD220
Mobil Gear 630
Shell Tellus 32
Mobil DTE oil
Light Hydraulic 24
Shell R2