Sharp SW-165HT Instruction Manual page 26


When you work together with more than two
people, it is best to keep constant verbal
communication with each other.
2. Use a forklift
Make sure that the lifting rod can fully withstand the weight of the machine. (Refer to Section 2 –
General Information for Specifications.)
Machine lifting with a forklift should be done strictly according to the lifting points
designated by the original manufacturer. If there is any doubt on missing lifting points on your
machine, please consult with the original manufacturer or its qualified agent before lifting the
machine.

Machine lifting is likely to damage the machine
if not performed properly.
You must have a qualified forklift operator
to perform the job.

You must apply proper forklift technique to
avoid damage to the machine.
Make sure the forks are able to reach in
at least 2/3 of the machine depth.

You must keep the machine balanced at all
times.
Make sure the forks are centered
before use.
3-4
(Only applies to the machine with the design of the lifting point.)
(Illustration only. Please follow user guide of your forklift.)