Sharp SW-165HT Instruction Manual page 72

Manual Lubrication Injection Device:
First 600hrs for new machine,then every 1200hrs
Replace the transmission oil after operating for first 600hrs for new machine,then every
1200hrs
Recommended gear oil

Shell Omala oil HD220

Mobil gear 630
Recommended hydraulic oil

ShellTellus 32

Mobil DTE Oil Light Hydraulic 24
Every six months
1.Clean the filter of the cutting fluid.
2.Replace the transmission oil for every half of a year(or 1200 hours).
Check the sight gauge to ascertain the transmission level.
Recommended TRANSMISSION OIL

Omala oil HD220

Mobil comp 632 600W Cylinder oil
3.Replace the hydraulic oil.
Recommended HYDRAULIC OIL

ShellTellus 32

Mobil DTE Oil Light Hydraulic 24
8-4
(if applicable)
Lubrication volume
Recommend keeping the volume over 50% inside the
vessel.
Please take down this vessel cap to replenish the
lubrication.
For the prevention of working environment pollution,
DO NOT replenish too much volume of lubrication while
supplying the lubrication into the vessel.
Under the circumstances of normal operation, replenish the
lubrication once every three days.
It may be adjusted the schedule of replenishing whenever
the user needs.
The main function is to lubricate the
liner guideway for saw bow
(The
for routine change
indicator.
slide rail and block
).
.