Parts To Be Used - Mitsubishi Electric AE-200A Instruction Book

2. Parts to be used

Prepare the following when performing a trial run.
Diagram of air conditioning control
system for building
Apportioned electricity billing function
setting information and metering
device connection information
AE-200/AE-50/EW-50 Instruction
Book –Apportioned Electricity Billing
Function–
AE-200/AE-50/EW-50 Instruction
Material
Book –BACnet
AE-200/AE-50/EW-50 Instruction
Book –BACnet
Electricity Billing Function Trial Run–
AE-200/AE-50/EW-50 Instruction
Book –BACnet
Instruction books for each air
conditioning unit, controller, and
metering device
PC
Microsoft Excel
BACnet
Initial Setting Tool (with apportioned
electricity billing function)
Equipment,
device USB memory device
Switching HUB
LAN cable (Category 5 or above
straight cable)
L-shaped driver (hexagonal wrench)
General tool such as a driver
*1 Contact your dealer to obtain this.
*2 For the necessary specifications and other information, refer to the AE-200/AE-50/EW-50 Instruction Book –Apportioned Electricity Billing
Function–, AE-200/AE-50/EW-50 Instruction Book –Initial Settings–, and AE-200/AE-50/EW-50 Instruction Book –BACnet
Tool–.
*3 You just need the minimum number only for a trial run, but the maximum number is more efficient for a combination of the settings and
trial run.
WT08246X03
Item
®
function–
®
Apportioned
®
Trial Run Tool–
*2
®
Trial Run Tool
Qty
1 Group configuration, IP address etc.
1
1 *1
1 *1
1 This document
1 *1
1
Used for running Microsoft Excel, Initial
1–2 Setting Tool, BACnet
*3
Integrated Centralized Control Web
1 Microsoft Excel 2007 or later
1 *1
1 *1
Used for retrieving CSV data (apportioned
results).
For manufacturers and models of
1 USB memory devices for which
operation has been verified, refer to the
AE-200/AE-50/EW-50 Instruction Book
–Initial Settings–.
1–2 *3 Used for connecting a PC.
2–4 *3 Used for connecting a PC.
Included with AE-200, used for removing or
1
attaching the AE-200 cover.
-
5
Remarks
®
Trial Run Tool, and
®
Trial Run