Table of Contents
Advertisement
Figure 32
1. Flange-head bolts (3/8 x
3/4 inch)
2. Spindle
4.
Remove the dust cap from the hub
Figure 33
1. Cotter pin
2. Spindle
3. Tab washer
5.
Remove the cotter pin and nut retainer from the
spindle and spindle nut
6.
Remove the spindle nut from the spindle, and
separate the hub and rotor assembly from the
spindle
(Figure 33
All manuals and user guides at all-guides.com
3. Caliper bracket (brake
assembly)
(Figure
4. Spindle nut
5. Nut retainer
6. Dust cap
(Figure
33).
and
Figure
34).
1. Spindle
g033047
7.
Wipe clean the spindle with a rag.
8.
Repeat steps
the other side of the machine.
33).
g192346
32
Figure 34
2. Hub and rotor assembly
1
through
7
to the hub and rotor at
g192347
Advertisement
Table of Contents
