Huawei NetCol8000-C070 User Manual page 136

NetCol8000-C(070, 130, 190) In-room Chilled Water
Smart Cooling Product
User Manual
Figure 4-14 Startup authorization
Step 2 Contact technical support engineers and notify them of the barcode and
verification code to obtain the service authorization code.
Step 3 Enter the startup password generated by the app in Authorization code on the
startup authorization screen to start the device.
----End
Non-initial Startup
Step 1 Tap Start on the home screen.
●
●
----End
Issue 09 (2022-12-15)
NO TE
The QR code shown in the preceding figure is used for scanning on the mobile app.
NO TE
Technical support engineers can obtain the service authorization code through the app. For
Data Center Facility Deployment Guide .
details, see the
If the Password required for start or shutdown onsite function is enabled,
enter the login password to start the unit.
Figure 4-15 Requiring a startup password
If the Password required for start or shutdown onsite function is not
enabled, tap OK to start the unit.
Copyright © Huawei Digital Power Technologies Co., Ltd.
4 Power-On Commissioning
126