Removing The Staple-Free Staple Unit - Canon Inner Finisher-L1 Service Manual

3. Remove the PCB Holder [1].
• 1 Screw [2]
1x
4. Remove the Stapler Unit [1].
• 2 Connectors [2]
2x
[1]
■ Handling after parts replacement
1. Clear the parts counter.
COPIER > COUNTER > DRBL-2 > FIN-STPR
Removing the Staple-free
Staple Unit
■ Preparation
1. Remove this machine from the host machine.
"Removing this Machine from the Host Machine" on
page 43
2. Remove the Rear Cover."Removing the Rear Cover"
on page 76
■ Procedure
1. Remove the Connector [1] and the Cable [2].
[1]
[2]
2. Remove the Staple-free Staple Unit [1].
• 2 Screws [2]
[2]
CAUTION:
How to assemble the Staple-free Staple Unit
When assembling, be sure to align the groove [1] of the
Staple-free Staple Unit with the Stepped Screw [2].
86
4. Parts Replacement and Cleaning
1x
1x
[2]
2x
[2]
[1]
[2]
[1]
[1]