Sensor; Removing The Delivery Sensor(Ps1); Removing The Disengaging Sensor (Ps16) - Canon Inner Finisher-L1 Service Manual

Sensor

Removing the Delivery
Sensor(PS1)
■ Preparation
1. Remove this machine from the host machine.
"Removing this Machine from the Host Machine" on
page 43
2. Remove the Front Cover
Cover Unit" on page 76
3. Remove the Rear Cover."Removing the Rear Cover"
on page 76
4. Remove the Upper Feed Guide
Upper Feed Guide Unit" on page 80
5. Remove the Tray Guide
Guide Cover" on page 78
6. Remove the Staple-free Staple
Staple-free Staple Unit" on page 86
7. Remove the Processing Tray
Processing Tray Unit" on page 81
■ Procedure
1. Remove the Delivery Sensor [1].
• 1 Connector [2]
1x
[2]
Unit."Removing the Front
Unit."Removing the
Cover."Removing the Tray
Unit."Removing the
Unit."Removing the
[1]
4. Parts Replacement and Cleaning
Removing the Disengaging
Sensor (PS16)
■ Preparation
1. Remove this machine from the host machine.
"Removing this Machine from the Host Machine" on
page 43
■ Procedure
1. Remove the Disengaging Sensor Holder [1].
• 1 Screw [2]
1x
2. Remove the Disengaging Sensor [1].
• 1 Connector [2]
1x
91
[2]
[1]
[2]
[1]