Removing The Staple-Free Staple Unit - Canon Inner Finisher-J1 Service Manual

Removing the Staple-free
Staple Unit
■ Preparation
1. Remove this machine from the host machine.
"Removing this Machine from the Host Machine" on
page 43
2. Remove the Rear Cover."Removing the Rear Cover"
on page 54
■ Procedure
1. Remove the Connector [1] and the Cable [2].
1x
1x
2. Remove the Staple-free Staple Unit [1].
• 2 Screws [2]
2x
[2]
[1]
[2]
[1]
CAUTION:
How to assemble the Staple-free Staple Unit
When assembling, be sure to align the groove [1] of the
Staple-free Staple Unit with the Stepped Screw [2].
[1]
■ Handling after parts replacement
1. Clear the parts counter.
(LV1) COPIER > COUNTER > DRBL-2 > FR-STPL
2. If the limited function message of the staple-free
stapling is shown on the host machine's LUI, clear
the message on the service mode.
(LV1) SORTER > FUNCTION > EMSG-CLR
63
4. Disassembly/Assembly
[2]